CCNA Exam: Drag & Drop

This section provides all Drag & Drop questions from CCNA Actual Exam.

Question1:
In order to complete a basic switch configuration, drag each switch IOS command on the left to its purpose on the right.

Click on the image for Orginal Size

Correct order:
Enable
Configure Terminal
Hostname
Interface vlan 1
No shutdown
Ip address
Ip default-gateway

Question 2:
All hosts in the same subnet with 172.16.5.118/26 must be denied Telnet access to hosts outside the LAN. To complete the bracketed command, [ access-list list-number deny tcp 172.16.5.__ address 0.0.0.__ mask___ any eq port__], drag each appropriate option on the left to its proper placeholder on the right. (Not all options are used.)

Answer:
List-number is 128 (extended access list)
Address is 64 (network 172.16.5.64 /26)
Mask is 63 ( wildcard mask 0.0.0.63 to allow 63 hosts)
Port is 23 (telnet port number is 23)
access-list 128 deny tcp 172.16.5.64 0.0.0.63 any eq port 23

Questions 3:

Drag the description on the left to the routing protocol on the right.

Answer:

EIGRP:
Is vendor specific and has default administrative distance of 90

OSPF:
elects a DR on each multiaccess network
uses cost as its metric

Question 4:

Answer:

Serial 0/1 is up, line protocol is up : Port Operation
Serial 0/1 is up, line protocol is down: Layer 2 Problem
Serial 0/1 is down, line protocol is down: Layer 1 Problem
Serial 0/1 is administratively down, line protocol is down: Port disable

Question 5:

Printers, inc. is redesigning the network that connects its three locations. The administrator gave tbe networking team 192.168.11.0 to use for addressing the entire network. After subnetting the address, the team is ready to assign the addresses. The administrator plans to configure ip subnet-zero and use RIP v2 as the routing protocol. As a member of the networking team, you must address the network and at the same time conserve unused address for future growth. With those goals in mind, drag the host addresses on the left to the correct router interface. One of the routers is partially configured. Move your mouse over a router to view its configuration. Not all of the host address on the left are necessary.

Answer:
Inkjet fa 0/0 IP : 192.168.11.31 /25
Laser Fa 0/0 IP: 192.168.11.225 /27
Spooler Fa 0/0 IP: 192.168.11.164 /26
Inkjet S0/0 IP: 192.168.11.217 /30

Question 6:

Riverside towing is redesigning the network that connects its three locations. The administrator gave the networking team 192.168.4.0 to use for addressing the entire network. After subnetting the address,the team is ready to assign the addresses. The administrator plans to configure ip subnet-zero and use RIP v2 as the routing protocol. As a member of the networking team, you must address the network and at the same time conserve unused address for future growth. With those goals in mind, drag the host addresses on the left to the correct router interface. One of the routers is partially configured. Move your mouse over a router to view its configuration. Not all of the host address on the left are necessary.

Answer:

Vans 0/0 IP : 192.168.4.194 /28
Cars Fa 0/0 IP: 192.168.4.169 /29
Trucks Fa 0/0 IP: 192.168.4.146 /27
Vans S0/0 IP: 192.168.4.165 /30

Question 7:

Riverside towing is redesigning the network that connects its three locations. The administrator gave the networking team 192.168.184.0 to use for addressing the entire network. After subnetting the address,the team is ready to assign the addresses. The administrator plans to configure ip subnet-zero and use RIP v2 as the routing protocol. As a member of the networking team, you must address the network and at the same time conserve unused address for future growth. With those goals in mind, drag the host addresses on the left to the correct router interface. One of the routers is partially configured. Move your mouse over a router to view its configuration. Not all of the host address on the left are necessary.

Answer:
Vans fa 0/0 IP : 192.168.184.229 /29
Trucks Fa 0/0 IP: 192.168.184.244 /28
Cars Fa 0/0 IP: 192.168.184.41 /25
Vans S0/0 IP: 192.168.184.237 /30

Question 8:

Drag the cable type on the left to the purpose for which it is best suited on the right (Not all options are used).

Answer:

Switch access port to router : Straight-through
Switch to switch : crossover
PC COM port to switch: rollover

Question 9:

Drag the options on the left under the type of switch port that they describe on the right.
Answer:

Access Port:
Carries traffic for a single VLAN
Connects an end-user workstation to a switch
Uses a straight-through cable to connect a device.

Trunk Port:
Uses 802.1q to identity traffic from different VLANs
Carries traffic for multiple VLANs
Facilitates interVLAN communication when connected to a Layer3 device

Question 10:

A host with the address of 192.168.125.34 /27 needs to be denied access to all hosts outside its own subnet. To accomplish this, complete the command in brackets, [access-list 100 deny protocol address mask any], by dragging the appropriate options on the left to their correct placeholders on the right.

Answer:
Protocol : IP
Address: 192.168.125.34 (host address)
Mask: 0.0.0.0 (wildcard mask for host)
access-list 100 deny ip 192.168.125.34 0.0.0.0 any